Control Heads

Micro Adjust Control Heads

Micro Adjust Micro Adjust control heads are ideal for remote operation of a throttle, regulating valve, or other applications needing precise adjustment capabilities.

Depressing the center button allows pushing or pulling the knob to make course travel adjustments. A flexible dust seal protects the internal release mechanism.

The maximum recommended load is 20lbs. Normal vibration does not affect the micro adjust setting. An optional friction lock accessory is available for applications where vibration is excessive. A disconnect feature and various output end configurations are available to suit a particular application.

Applications: Throttle control, Regulating valve

Non Lock Control Heads

Non Lock Non-lock control heads are designed for remote engine shutdown/choke, latch/valve operation, and numerous other applications. These panel or bracket mounted units are intended for light to moderate loads.

They are cost effective solutions to mechanically connecting a manual input source to a remote output, especially when space is limited or rod linkage and bell cranks are not suitable choices.

Various T-handles/knobs with or without functional identifications, as well as output end configurations are available. The ordering code and technical description shows the numerous choices.

Applications: Engine shut down, Engine choke, Latch operation, Valve operation

Twist Lock Control Heads

Twist LockThese Twist Lock control heads are a robust and simple design – only one moving part. The T-handle is free to travel the full length of the control until locked.

Rotating the T-handle 1/8 turn in either direction along the travel will secure loads up to 100lb (44g), and yet unlocks with ease.

They are cost effective solutions to mechanically connecting and locking a manual input source to a remote output, especially when space is limited or rod linkage and bell cranks are not suitable choices.

Applications: Engine shut down, Engine choke, Latch operation, Valve operation

Button Control Heads

Button LockButton lock control head cables remotely operate and lock in position heater, ventilation, air conditioning or numerous other mechanisms needing adjustment.

Depressing the center button allows pushing or pulling the knob to make course travel adjustments. Routing of the flexible cable allows installation options that are not possible with solid linkages.Various output configurations are available to suit a specific application.

Applications: Aircraft, Heat control, Vent control, A/C control, Engine cowl control